2- 4
Service Manual
LWE130
© BT Europe AB
Introduction Maintenance – P1
Safe lifting
T-code
Valid from serial number
Date
Order number
675
914369-
2005-09-23
226057-040
2.3 Safe lifting
All lifting must be carried out on a flat, non-slip and firm surface. Avoid
new laid asphalt or asphalt on a hot summer’s day.
•
Activate the parking brake to prevent the truck from moving during
the lift. If the lift applies to the brake wheel, chock the other wheels
so that the truck stands still.
•
Select a lifting point so that the lift is as easy as possible (one corner
at a time). If the truck has marked lifting points on the under side of
the chassis these can be used to obtain a well balanced lift.
•
Ensure that the surface under the jack is clean and free from oil and
grease.
•
Ensure that your hands and the jack’s lever are free from oil and
grease.
•
Use the lever that belongs to the jack. A lever that is too short re-
quires more force than is necessary. If the lever is too long there is a
risk of the jack being overloaded.
•
Support the truck:
-
as close as possible to the part of the chassis that is to be lifted.
This reduces the risk of the truck tipping over.
-
so that the truck cannot roll.
•
Never lift up the jack in order to lift higher.
•
Never work under a lifted truck unless it is well supported.
WARNING!
Risk of crushing.
A badly supported truck can fall.
Never work under a truck that is not supported on trestle-blocks and
secured by a lifting device.
https://www.besttruckmanuals.com/
