2- 2
Service Manual
LWE130
© BT Europe AB
Introduction Maintenance – P1
Safety regulations with maintenance work
T-code
Valid from serial number
Date
Order number
675
914369-
2005-09-23
226057-040
•
Use paper or a rigid sheet of cardboard when checking for oil leak-
age. Never use your hand.
•
Bear in mind that the oil in the transmission or the hydraulic system
can be hot.
WARNING!
Risk of burns.
Hot transmission and hydraulic oil.
Let the truck cool before changing the oil.
•
Only fill the hydraulic system with new and clean oil.
WARNING!
The hydraulic system can be damaged.
If the oil is contaminated hydraulic components can be damaged.
Always use new and clean oil in the hydraulic system.
•
Store and dispose of changed oil in accordance with local directives.
•
Do not release solvents and the like, which are used for cleaning/
washing, into drains that are not intended for this purpose. Follow
the local directives that apply for disposal.
•
Disconnect the battery when welding on the truck.
NOTE!
The battery can be damaged.
When welding using an electric power source the welding current can
enter the battery.
The battery should therefore be disconnected.
•
Remove at least 100 mm of paint around the welding/grinding area
through sand-blasting or the use of a paint stripper when welding or
grinding on painted surfaces.
CAUTION!
Harmful gases.
Paint that is heated gives off harmful gases.
Remove 100 mm of paint from the work area.
https://www.besttruckmanuals.com/
