36
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Using additional handsets
You can use up to five GAP compatible handsets with your BT
Hudson 1100 base to extend your phone system without needing
to install extension sockets for each new phone.
If you have purchased a BT Hudson 1100 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased a GAP compatible handset separately you
must register it to your BT Hudson 1100 base before it can be
used, following the instructions that come with the new handset.
Handset registration
If your BT Hudson handset is not already registered to any other
base, the screen will show
not
regiStereD
preSS
<Menu>
to
regiSter
. Just follow the instructions on the handset screen
to register the handset. If your BT Hudson handset is already
registered to another base, follow the instructions below:
Registration
At the base:
1
. Press and hold
for approximately 5 seconds until you hear
a long beep. You now have 2 minutes to register the handset.
For a Hudson handset:
1
. Press
Menu
, scroll
or
to
ADvAnCeD
Set
and
press
SeleCt
.
2
. Scroll
to
regiStrAtion
, press
SeleCt
.
3
. Scroll to a base number, press
SeleCt
. Enter the system
PIN (default setting 0000) and press
ok
. The handset will
search for the base and then display
regiStering
.
When registration is complete you hear a long confirmation
beep and the handset will be allocated the next available
handset number.
The handset is automatically assigned
the next available handset number.
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. The display
shows
too
MAny
hAnDSetS
.
Even if a handset is out of range
or turned off, it will still have a
registration slot allocated to it.
You must de-register another handset
before you can register the new one.
If your BT Hudson 1100 handset is
registered to more than one base, you
can select which base to use.
If you have a handset registered
to more than one base and then
de-register it from one it will
show
not
regiStereD
. You will
need to re-register the handset to
whichever base you want to use.