22
Help
Help
If you have any problems using your
Freestyle 90, this section will give you the most common,
easy-to-follow solutions.
• No dialling tone.
• Telephone will not dial out.
• Telephone cannot receive
calls.
• Beeps six times and drops
calls.
Telephone not connected to
telephone line.
Mains disconnected
Handset battery is discharged.
Handset is not registered to the base
unit.
Replace the handset on the base unit
for 10 seconds and try again. If this
does not work, disconnect the
handset battery from the handset for
10 minutes. Also disconnect the
mains power.
Then reconnect the base unit to the
mains, then replace the handset on
the base unit for 10 seconds and try
again.
Plug the telephone into the
telephone line.
Place the handset on the base unit
and recharge it for 24 hours
ensuring the
CHARGING
light is on.
Re-register the handset.
Refer to Page 19 to first erase
registration and then re-register the
handset.
Telephone problems
Possible cause
Solution
• You have a dialling tone but
the telephone will not dial
out.
You may be trying to use tone
dialling on a pulse dialling
exchange.
You are connected to a PBX and are
not dialling the access code.
Set the mode switch to
P-E
(pulse dialling). Refer to page 15
for
TEL MODE
setting.
Use the PBX access code.
• Handset does not ring.
• No lights on handset.
Handset battery is discharged.
Place the handset on the base unit
and recharge it for 24 hours.
• Handset does not ring, but
lights show on the handset.
The handset ringer may be set to its
minimum setting.
Increase the handset ringer volume.
Freestyle 90 +UG 29/9/99 2:28 pm Page 22