Freestyle 90/130/1200 Additional Handsets
20
Setting the handset
number
Each additional handset must be
assigned an identity number (1, 2, 3
or 4). Your Freestyle 90 handset is
already numbered as
HANDSET 1
,
additional handsets can then be
numbered as they are added.
To set a handset identity number
•
Press and release the
QUICKDIAL
button.
•
Press and release the
SECRECY
button.
•
Enter the identification number
(1-4) using the keypad.
•
When you have entered the
number press the
QUICKDIAL
button.
•
You will hear a beep confirming
that the new number has been
stored.
Your Freestyle additional handset is
pre-set to handset number 2.
Make a note of the identification
number by writing it on the handset’s
directory label.
• As soon as the
IN USE
light
begins to flash, release the
PAGE
button and place the additional
handset on the base unit.
• Your additional handset is
registered automatically and you
will hear a long confirmation
beep and the
IN USE
light will
stop flashing.
To re-register an
additional handset
Before re-registering, the old
registration code must first be
erased. If necessary you can
re-register your additional
handset by simply following the
above procedures.
Your additional handset must
be placed on the base unit within
5 seconds of the
IN USE
light f lashing.
Check that your additional handset is
registered correctly by pressing the
TALK
button and listening for a dial
tone. If you do not hear a dial tone
your additional handset is either out of
range of the base unit or it has not
been registered properly, or the base
unit line cord is not plugged in.
Freestyle 90 +UG 29/9/99 2:28 pm Page 20
