BT Freestyle 90, Руководство пользователя

Страница: 15 / 35

Using your Freestyle 90
15
Changing the telephone
settings
You should be close to the base unit when
changing the telephone settings
To set the base unit ringer volume
You can set the base unit ringer
volume to
HI
,
LO
or
OFF
through
your Freestyle 90 handset.
• Press the
QUICKDIAL
button.
• Press the
#
button.
• Press
1
to set the ringer volume
to HI. Press
2
to set the ringer
volume to LO. Press
3
to set the
ringer volume to OFF.
• Press the
QUICKDIAL
button. You
hear a confirmation beep.
If the base unit ringer is switched to
OFF, the handset will still ring
provided the handset ringer is not
switched to OFF. You can set the
TEL MODE
to tone or pulse dialling
and earth or time break recall:
• T-TB
– Your Freestyle 90 is preset
to this position. Most modern
exchanges use tone dialling and
time break recall for faster
dialling, and for services such as
BT Select Services and telephone
banking.
• T-E
– This setting is for use if
you are connected to a tone
dialling PBX (Private Branch
Exchange) that uses earth recall.
• P-E
– If you dial a number when
your Freestyle 90 is set to
T-TB
or
T-E
and you continue to hear
the dialling tone, you may be
connected to an older pulse
dialling exchange. Set the tel
mode to
P-E
(pulse dialling).
You can set the TEL MODE by
following the procedures below
through your Freestyle 90 handset:
• Press the
QUICKDIAL
button
• Press the
✱
button.
• Press 1 to set the
TEL MODE
to
T-TB.
Press 2 to set the
TEL MODE
to
T-E.
• Press 3 to set the
TEL MODE
to
P-E
• Press
QUICKDIAL
button.
Your hear a confirmation beep.
Freestyle 90 +UG 29/9/99 2:28 pm Page 15