BT Ergomover 620 AC-TT, Руководство оператора

Страница: 25 / 28

Transporting and storing the truck
© BT Industries AB 212908-040
24
Transporting and storing
the truck
Lifting the truck
• Lift the truck from the marked lifting points.
• The truck must be firmly secured when it is transported on a
truck, trailer or the like. Use the marked lifting points when
securing the truck in place.
• To protect the truck against rain, moisture and cold, do not
transport it on an open truck platform or an open trailer.
The truck must not be turned upside down or laid on its side,
since battery acid then may leak out.
Storing the truck
• Make sure that the batteries are fully charged when the truck
is taken out of service. If the truck is out of service for a long
time, the batteries should be recharged every month. This
should be recorded by the operator or the person who is
responsible for the charging work.
NOTE: The batteries are connected in series to give 24V DC
when they are mounted in the truck. If they are removed for stor-
age, they must be connected in series for charging! A special
adapter cable for connection in series and suitable for the charg-
ing connector should then be used. This cable must be ordered
from your supplier.
• Clean the truck and carry out maintenance work before it is
taken out of service. Any faults should first be repaired.
• Make sure that the master key is removed and that the key
switch is in position 0. Keep the keys seperated from the
truck. The entire truck should be protected against dirt, mois-
ture, cold weather, etc.
Starting after a period of disuse
If the truck has been out of service for more than three months,
the operator should go through the various maintenance points
before test-driving the truck.