BT Ergomover 620 AC-TT, Руководство оператора

Страница: 13 / 28

Driving
© BT Industries AB 212908-040
13
Driving
The key switch and the master key are important to the operator
and to safety. The key switch is provided to a unique key to pre-
vent unauthorized use of the truck. Note that the key switch only
disconnects the operating current for motor control and applies
the parking brake.
The master key disconnects battery power (the battery indicator
goes out when one of the key switches is switched off).
Model 620 AC-TT
The load should be uniformly distributed on the trolley/trolleys
and firmly secured so that it will not fall off or throw about while
driving. The trolleys used must conform to the BTs technical
specifications.
Hitching trolleys:
- Reverse the truck up to the trolley.
- Turn the key switch to 0 to prevent unintentional move-
ment of the truck.
- Connect the trolley to the truck.
- Ensure that the connecting device is properly locked.
WARNING!
Exercise maximum care when towing trolleys.
With a heavy load, braking suddenly while turning may cause
the trolley and truck to turn over!
Control
The pedal/contact mat on the floor in the driver compartment
serves as a safety switch and must be pressed down to enable
the truck to be used, see picture in chapter
Main components.
This prevents inadvertent starting.
The truck is manoeuvred by means of the steering wheel and a
control lever which controls speed and motor brake (reversing).
The control lever is moved forwards to drive the truck forwards,
and backwards to brake the truck.
If the pedal/contact mat is released, the parking brake operates
automatically. Continuing to move the control lever backwards
from the neutral position causes the truck to reverse. Moving the
control lever forwards again operates the brake during revers-
ing.