Diverse Repeater
(rear view)
Power adaptor
C39280-Z4-C174 or C39280-Z4-C67
Diverse Repeater ~ 4th Edition ~ 25th April ’01 ~ 3831
6
Follow the instructions in this section
to set up your Repeater ready for use.
In addition to this user guide you
should have the following items:
•
The Repeater unit.
•
A power adaptor.
•
2 screws and wall plugs.
The power adaptor has a long lead
with a small plug on the end of it which
has to be plugged into the socket on
the back of the Repeater as shown in
the diagram.
You should use a free mains socket in
the vicinity of your base unit so that the
Repeater and base unit can be near
each other during registration.
Setting up
●
1
Unpack the Repeater
●
2
Connect the power adaptor
to the Repeater
●
3
Plug the power adaptor
into the mains socket
The green LED should light up (may
be continuous or flashing) which will
prove power is being supplied to the
Repeater.
●
4
Switch on the mains power
●
5
Switch off the mains power
. . . . . .
. . . . . .
. . . . .
Green LED