4 Set the dial mode
Your Response 110 is pre-set to TONE (TB)
dialling. This ensures the phone will work with
all modern digital exchanges.
If you dial a number and continue to hear the
dialling tone, you may need to switch the
phone to PULSE (P) dialling.
5 Set the ringer volume
The ringer switch is located on the back of the
base unit. There are three settings.
•
HI
– a loud ring.
Your Response 110 is pre-set to this position.
•
LO
– a quiet ring.
•
OFF
– no ring.
OFF LO HI
P TB
Edition 9 – 10 March 1999
6
Setting up
2 Plug the power cord into the
back of the machine
To prevent the power cord being pulled out
accidentally, route it behind the clip on the
back of the unit.
3 Now plug the adaptor into a
convenient mains power socket
When the power is switched on you hear
a single beep, the MC30 cassette operates
briefly.
Response 110 user guide 19/1/2000 12:43 pm Page 8
