To switch on your Response 110 from
another phone
If you forget to switch on your Response 110:
•
Dial your phone number. After 10-12 rings,
your Response 110 will answer and you hear
two beeps.
•
Enter your security code after the two beeps,
holding the button down for 3 seconds. You
hear a beep to indicate the number has been
accepted.
•
Your outgoing message is played.
•
Hang up. Your Response 110 is now
switched on.
Edition 9 – 10 March 1999
16
Remote access
You can switch on your Response 110 or play
back messages and memos from another
phone using a
TouchTone
TM
telephone keypad.
To play back messages and memos you need
to use your machine’s security code. The code
is printed on a label on the cassette lid.
Additional features
Additional features
During playback, your Response 110 will pause
after approximately 3 minutes. You will hear 2
short beeps. If you wish to continue playing your
messages, enter your security code WITHIN 5
SECONDS of hearing the beeps, holding it down
for 3 seconds. If you do not, your Response 110
will hang up and rewind to the beginning of the
messages. Remember, your code must be held down
for 3 seconds. The beeps indicate a pause and will
be repeated every 3 minutes throughout the call
until the end of the messages.
Certain telephones and some public payphones may
not generate a continuous tone. If so we recommend
that you purchase a tone caller, these are readily
available from BT.
Response 110 user guide 19/1/2000 12:43 pm Page 18
