Instruments
© BT Industries AB 180424-040
19
Air cleaner warning lamp
1.
This lamp comes on when the air cleaner element gets
clogged during engine running.
2.
If normal, the lamp comes on when the ignition switch is
turned on and goes off when the engine starts.
3.
If the lamp comes on while the engine is running, stop the
engine and clean the element and dust cup. For the cleaning
method, refer to the Weekly Inspection Section.
Charge warning lamp
1.
This lamp comes on to indicate an abnormality in the charg-
ing system while the engine is running.
2.
If normal, the lamp comes on when the ignition switch is
turned on and goes off when the engine starts.
3.
If the lamp comes on while the engine is running, stop the
operation immediately, inspect the fan belt for cuts or loos-
ening, adjust it, and restart the engine.
If lamp does not go off, the generation system may be faulty.
Please ask a BT dealer immediately for inspection and
repair.
Water temperature gauge
Indicates the temperature of the engine cooling water.
1.
Operates when the ignition switch is on.
2.
In normal state, the indicator is in the green zone at the
center.
3.
If the indicator is in the red zone, the engine may be over-
heated. Stop the vehicle in a safe place, idle the engine for a
while, and stop the engine when the indication falls.
4.
Temporary overheating may be caused by water leakage,
insufficient engine coolant level, loosened fan belt or other
abnormality in the coolant level, loosened fan belt or other
abnormality in the cooling system.
Inspect the cooling system.
