BT Versatility
Broadband Module/Broadband Module Plus Manual
64
•
Enter the following parameters:
Global IP address
This is the public IP address assigned to the WAN interface
Internal IP Address This is the internal IP address of the server on the LAN
Transport Type
Select a protocol from the drop down list
External Port
Range
A port or port range can be defined for the external IP
address
Internal Port
Range
A port or port range can be defined for the internal IP
address
•
Select “Add Reserved Mapping”
Policies, Triggers, Intrusion Detection, Logging
The security policy settings, stateful inspection triggers, intrusion policy detection and logging
settings can be displayed and changed.
Security Policy
Three types of filters can be defined in the firewall:
Port Filters are used to allow or block a specific TCP/IP application level protocol. The
parameters used to specify this filter are source and destination IP address or range of
addresses, a transport level protocol TCP/UDP/ICMP), and a port or range of ports which define
the application level protocol.
Raw IP Filters are used to allow or block a specific protocol (non TCP/IP) carried within an IP
packet. The parameters used to specify this filter are source and destination IP address or range
of addresses, and a protocol number which identifies the protocol carried in the IP packet.
Host Validators are used to block all traffic from a specific host. The parameter used to specify
this filter are an IP address or range of addresses.
Note that if invalid filter entries are added, an error message will be displayed when the
configuration is saved.
•
Select “Security Policy Configuration …”
The following screen is displayed.
Содержание Broadband Module
Страница 1: ...Broadband Module Broadband Module Plus ...
