Settings
If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp
40
The System PIN is used when
changing certain settings and
registration / deregistration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
Clear
to delete.
Change system pIn
1. Press
Menu
and scroll to and press
OK
.
2. Scroll
to
Base
and press
OK
.
3. Scroll
to
Change
System
PIN
and press
OK
.
4. Enter the old 4 digit PIN (default=0000) and press
OK
.
5. Enter the new 4 digit PIN and press
OK
.
6. Enter the new 4 digit PIN again and press
OK
.
Saved
will be shown.
PBX access code
If you’re connected to a switchboard, you might need
to enter an access code (e.g. 9) before each number
is dialled. Your BT Aura 1500 can store an access code
which is automatically dialled before each number.
Setting the pBX access code
1. Press
Menu
, scroll to and press
OK
.
2. Scroll
to
Base
and press
OK
.
3. Scroll
to
PBX
Access
. Press
OK
.
4. Enter the number you want (single digit only) and
press
OK
.
Saved
will be shown.
If an extension number of
six digits or fewer, or a local
number without the dialling
code, is entered in your
contacts, then an access code
and Pause will prefix the
number when it’s dialled out.
