Press buttons in order shown
Lift the handset and listen for the
dial tone. The Line 1 red light
comes on.
Dial the number you require.
To end the call, replace the
handset.
Press and hold down the
Line 2
button and lift the handset.
The Line 2 red light comes on.
Release the Line 2 button.
Dial the number you require and
listen for the dialling tone.
To end the call, replace the
handset.
The phone rings and the red Line
1 Ringer light flashes.
Lift the handset and speak.
To end the call, replace the
handset.
Line 2
8
To make a call on Line 1
To make a call on Line 2
To receive a call on Line 1
The phone rings and the red
Line 2 Ringer light flashes.
Press and hold down the
Line 2
button and lift the handset.
Release the Line 2 button and
speak.
To end the call, replace the
handset.
When a call is placed on hold,
you cannot hear your caller and
they cannot hear you.
During a call:
Press and release the
HOLD
button.
The
IN USE
light changes from red
to green and the call is on hold.
To take the call off hold, press
the
Line 1
or
2
button (depending
on which line you are using. The
green light changes back to red
and you can talk to your caller.)
Line 2
Line 1
Ho
ld
Line 2
To receive a call on Line 2
To put a call on hold
Using your Converse 2-Line
