manualshive.com logo in svg

BT Redcare Essential Extra, Руководство по установке, Страница: 37 / 41

Поделиться
Скачать
BT Redcare Essential Extra Скачать руководство пользователя страница 37

Disposal

The symbol shown here and on the product, means that the product is classed  
as Electrical or  Electronic Equipment and should not be disposed of with other 
household or commercial waste  at the end of its working life.

The Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has 
been put in  place to recycle products using the best available recovery and recycling 
techniques to minimise the impact on the environment, treat any hazardous substances 
and avoid the increasing landfill.

Product disposal instructions for users

Please dispose of the product as per your local authority’s recycling processes.  
For more information please contact your local authority or retailer where the  
product was purchased. 

The product may be returned to the freepost address below:

BT Supply Chain 
Darlington Road 
Northallerton 
North Yorkshire 
DL6 2PJ

Disclaimer 

The manufacturer or his agents disclaim responsibility for any damage, financial loss 
or injury caused to any equipment, property or persons resulting from any use of this 
equipment. The manufacturer is not liable for any purely economic loss arising from any 
use of this equipment. All responsibility and liability in the use of BT Redcare products 
are assumed by the user.

This unit is designed to be used in customer premises. Use of this equipment in other 
locations may void warranty. 

This unit is not intended for use in marine environments or water borne vessels.

BT Redcare may make changes to features and specifications at any time without prior 
notification in the interest of ongoing product development and improvement.

37

Содержание Essential Extra










































Отзывы:

Нет отзывов