BSVILLAGE EcoPAC 04, Инструкция по эксплуатации

Страница: 22 / 72

- 23 -
Start-up and Stand-by
Mode selection
Press MODE to select the unit operation mode
Wa ter Tem per atu re
To set the temperature during working, press
▲
or
▼
to change the setting.
Setting is automatically recorded and display shows working information after few seconds.
Checking of other parameters
In stand-by, display will show
ambient temp only.
Press
to start the
machine.
In working mode, display will
show water temp (in), ambient
temp (room out) and current
working mode.
Heating mode Cooling mode
Automatic mode (heating and
cooling)
To set the temperature during
working, press
▲
or
▼
to
show the setting.
Press
▲
or
▼
to change the
setting.
Setting is automatically
recorded and display shows
working information after few
seconds.
When the unit is on standby,
press SET 10 sec to show
parameters.
Press SET to check the value
of the desired parameter.
Go out of the setting with
▲
or
▼
.