DECLARATION OF CONFORMITY
Manufacturer’s Name:
BSS Audio
Manufacturer’s Address:
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product name:
BLU 10
Note: Product name may be suffixed by the letters-EU.
Product option: None
conforms to the following Product Specifications:
Safety:
Low Voltage Device
EMC:
EN 55103-1 (1996)
EN 55103-2 (1996)
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/
EEC and the EMC Directive 89/336/EEC as amended by Directive 93/68/EEC.
Vice-President of Engineering – Pro
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: October 24, 2005
European Contact: Your local BSS Audio Sales and Service Office or
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah 84070, USA
Ph: (801) 566-8800
Fax: (801) 566-7005
Introduction
We have written this guide with the aim of helping installers and sound engineers
alike to get the most out of the BLU-0. We recommend that you read this manual,
before attempting to operate the unit. We welcome any comments or questions
regarding the BLU-0 or other BSS products, and you may contact us at the address
or world wide web sites given overleaf.
Regulatory Information
An example of this equipment has been tested and found to comply with the
following European and International Standards for Electromagnetic Compatability
(only when used with a metal wall-box):
FCC part 5 Class A
EN550-: 996 (E)
EN550-: 996 (E)
Mechanical Installation
The BLU-0 is designed to fit into a standard -gang US wall box. Screws
are provided to fix the unit in place.
Dimensions of the unit are shown below. The use of a metal wall box
is recommended to ensure that the installation meets necessary EMC
standards.
70mm
6.69ins
57mm
.4ins
mm
4.84ins
6mm
.0
ins
mm
.
ins
45mm
.77ins
Power
The BLU-0 requires -48V DC to be supplied externally. There are two ways to
do this:
Connect a suitable supply to the -48V DC connector, see diagram below,
or
the unit may be powered via the Ethernet connector using IEEE80.af Power Over
Ethernet (POE).
Typical mid-span ethernet powering devices are:
Com® Power over Ethernet Single-Port Midspan Solution - p/n CNJPSE
Com® Power over Ethernet Multiport Midspan Solution - p/n CNJPSE4
Ethernet switches with power over ethernet ports include:
Com® SuperStack® Switch 4400 PWR - p/n C705
HP ProCurve Switch 66-PWR - p/n J864A#ABA
