BSS Audio Omnidrive FDS-380, Руководство пользователя

Страница: 20 / 66

20
Quick Reference
1 Press the EDIT key to enter the edit screens.
2 Press STORE or RECALL for the file handling screens.
When the FDS-388 is powered up the Default screen is shown. The Default
gives a basic representation of the current state of the unit. If the unit has
Owner Lock On, the Default screen will be replaced by the current start up
logo along with the current program name and number.
The main area of the screen contains the four output band curves and the
humidity correction (if switched on). Each band curve represents the frequency
response of the high pass and low pass crossover rolloffs in addition to any
equalisation filters that have been used (and that are not hidden).
The rolloff frequencies are adjusted in the XOver Screens,
refer to Section
11.0, XOver Screen and Section 13.0, More XOver Screen
.
The equalisation is adjusted in the EQ Screen, refer to Section 9.0, EQ Screen .
A fifth, dotted, curve is only visible when humidity correction is enabled. The
dotted curve is the frequency response of the adjustment applied to the
channel input signal (before it is split into the four frequency bands).
Humidity correction is adjusted in the Delay Utils Screen, refer to Section 6.0,
Delay Utils Screen.
Default Screen
5.0 Default Screen
Program number Swap status OEM name Edited flag Program name
Status Band response curves Humidity correction