Motor-driven blocking device EasyBlocker
Installation instruction
108320
2.1.4 Emergency opening
Electrical emergency opening:
The connecting wires of the supply voltage need to be led to a position which is easily accessible in case
of an error (e.g. behind the bell or the cover of the communicator, or others) in order to be able to use the
electrical emergency opening options.
Please find further information regarding the electrical emergency opening under
Mechanic emergency opening:
Observe the following items during assembly in order to be able to use the mechanic emergency opening
in case of an error:
•
Mark the hole for the emergency opening on the door frame after having installed the blocking
device in the door frame by means of the drilling template for emergency opening instructions or by
means of the installation dimensions on
illustration
2-2.
•
If appropriate, drill the hole for emergency opening (
ø 6 mm
) into the door frame and close it using
the attached cover caps.
Attention:
Firstly disassemble the blocking device in order to avoid damages on the housing
when drilling.
Please find further information regarding the mechanic emergency opening under
Illustration 2-2
- Installation dimensions of the blocking device
8320AB202en.eps
page 6
version 6.0a / 06.04.2016
108320Err_ENG.doc