System Setup and Configuration
Setting the Speaker Configuration
Before calibrating levels you must first tell the SP1 about your
loudspeaker configuration.To do this:
1. First enter the main menu by pressing on any one of the
menu buttons (< - > or SELECT).
2. Next move the cursor to "SP". Hit 'SELECT' - You are now in
the Speaker Menu.
3. Move the cursor to the speaker(s) you want to change the
configuration for using the arrow keys (LR, C, SUR, SUB).
Hit 'SELECT'.
The options available in this menu are:
For LR you can select SMALL OR LARGE
For CENTRE (C) you can select SMALL, LARGE or NONE
FOR SUR(OUNDS) you can select SMALL, LARGE or NONE
FOR SUB(WOOFER) you can select YES or NO
The SP1's default factory settings as shipped are:
Front = LARGE, Centre = NONE, Surrounds = SMALL,
Subwoofer = YES.
4. Once you have completed selecting the settings that match
your particular speaker systems please move the cursor to
the (X) and press SELECT to exit this menu.
NOTE: LARGE VS SMALL SPEAKER SETTINGS:
It is very important that you understand what is meant by the
LARGE and SMALL settings in this menu.They do not refer to
SIZE, but to the ability of the particular loudspeaker system to
handle low bass/low frequency information. It is very
important that you consult your loudspeaker providers
instruction manual or the company regarding the capabilities
of your particular system with regard to low bass/low
frequency reproduction.
Please note that all THX certified
loudspeaker systems are SMALL since a subwoofer is a part of any THX
certified loudspeaker system.
It is strongly recommend that you
consider using a subwoofer for any system which you expect
16
Figure 12: Speaker Configuration Menu
Figure 11: Setup Menu
