Programming the AUX Trigger Output
i. Enter the main menu by pressing on one of the menu
buttons on the SP1 front panel. Move the cursor to "OS".
Hit 'Select' - You are now in the Other Settings
(Optical/THX) Menu.
ii. Move the cursor to "T". (T = Trigger) Hit ‘Select’. Now
you can assign the AUX Trigger output to ON or OFF, for
each of the 6 input sources.
iii. To change the source, use the "<" button.To toggle the
trigger setting On or Off, use the ">" button. Hit ‘Select’ to
exit when finished.
8. Aux IR Receiver
The Aux IR Input is a miniature mono phone jack connector.
This is used to connect externally mounted IR LED receivers,
or other extenders that provide modulated IR receiver data.
Data is retransmitted by by an IR LED mounted near the front
panel IR receiver.
9. RS-232 connector
This connection provides for control of an external video
switcher, or remote control of the SP1 functions via a
computer interface or AMX/Crestron type controller. Please
contact your dealer or Bryston to make use of this optional
feature and determine which devices are compatible.
10. IEC Power Connector
11. Fuses
Please note that the Analog and Digital power supplies are
fused separately. Replace fuses ONLY with an exact equivalent
to avoid damage to the SP1.
12. Master Power Switch
13
Figure 9: Trigger Assign Menu
