Eshop:
Email:
w
w
w
.e
M
A
R
eg
.c
z
5
AmpTip
indicators where applicable) as much as possible to get the best measuring
accuracy. For removal, press the jaw trigger and remove the jaws from the
conductor(s).
Adjacent current carrying devices such as transformers, motors and conductor wires
may affect measurement accuracy. Keep the jaws away from them as much as
possible to minimize influence.
This Clampon meter series is designed to directly apply around or remove from
uninsulated hazardous live conductors. But still, individual protective equipment must
be used if hazardous live parts in the installation where measurement is to be carried
out co uld be accessible. Do not use the meter to measure currents above the rated
frequency (400Hz). C irculating currents may cause the magnetic circuits of the Jaws
reach a hazardous temperature.
Input is made via the clamp jaws where best accuracy is specified near the jaw TIP
CENTER area for lowcurrent measurements of thin
conductors. Defaults at
.
Press
button momentarily to select
for Models 035 & 037.
