Bryant 580J*04A Скачать руководство пользователя страница 25

Страница: 25 / 52

User Interface — The user interface consists of a 2-line LCD

display and a 4-button keypad on the front of the economizer

controller.

Fig. 40 — W7220 Controller Button Description

Keypad — The four navigation buttons (see Fig. 40) are used

to scroll through the menus and menu items, select menu items,

and to change parameter and configuration settings.

To use the keypad when working with menus:

• Press the

▲

(Up arrow) button to move to the previous

menu.

• Press the

▼

(Down arrow) button to move to the next

menu.

• Press the (Enter) button to display the first item in the

currently displayed menu.

Press the

(Menu Up/Exit) button to exit a menu’s

item and return to the list of menusTo use the keypad when

working with Setpoints, System and Advanced Settings,

Checkout tests and Alarms:

1. Navigate to the desired menu.

2. Press the (Enter) button to display the first item in the

currently displayed menu.

3. Use the

▲

(Up arrow) and

▼

(Down arrow) buttons to

scroll to the desired parameter.

4. Press the (Enter) button to display the value of the

currently displayed item.

5. Press the

▲

button to increase (change) the displayed

parameter value.

6. Press the

▼

button to decrease (change) the displayed

parameter value.

NOTE: When values are displayed, pressing and holding the

or button causes the display to automatically increment.

7. Press the (Enter) button to accept the displayed value and

store it in nonvolatile RAM.

8. “CHANGE STORED” displays.
9. Press the (Enter) button to return to the current menu

parameter.

10. Press the (MENU Up/Exit) button to return to the

previous menu.

Menu Structure — Table 13 illustrates the complete hierarchy

of menus and parameters for the EconoMi$er

X system.

The Menus in display order are:

• STATUS

• SETPOINTS

• SYSTEM SETUP

• ADVANCED SETUP

• CHECKOUT

• ALARMS

NOTE: Some parameters in the menus use the letters MA or

MAT, indicating a mixed air temperature sensor location

before the cooling coil. This unit application has the control

sensor located after the cooling coil, in the fan section, where it

is designated as (Cooling) Supply Air Temperature or SAT

sensor.
Setup and Configuration — Before being placed into service,

the W7220 Economizer module must be setup and configured

for the installed system.

The setup process uses a hierarchical menu structure that is

easy to use. Press the and arrow buttons to move forward and

backward through the menus and press the button to select and

confirm setup item changes.

See Table 14 for damper minimum position settings and

readings on the checkout menus.
Time-Out and Screen-Saver — When no buttons have been

pressed for 10 minutes, the LCD displays a screen saver, which

cycles through the Status items. Each Status items displays in

turn and cycles to the next item after 5 seconds.
1 and 2 Speed Fan Operation — For 1-speed fan dry bulb and

enthalpy operation see Tables 15-18. For 2-speed fan operation

see Tables 19-22.

IMPORTANT: Table 13 illustrates the complete hierar-

chy. Menu parameters may be different depending on

the configuration.

For example if there is no DCV (CO

) sensor, then

none of the DCV parameters appear and only MIN POS

will display. If a CO

sensor is used, the DCV MIN and

DCV MAX will appear AND if there is a 2 speed fan

DCV MIN (high and low speed) and DCV MAX (high

and low speed) will appear.

IMPORTANT: During setup, the Economizer module is

live at all times.

Содержание 580J*04A





















































Результаты поиска

Содержание 580J*04A

Отзывы:

Бренды по названию

Популярные бренды

Bryant 580J*04A, Руководство по установке

Результаты поиска

Содержание 580J*04A

Отзывы:

Бренды по названию

Популярные бренды