29
New Brunswick Scientific Co., Inc.
User’s Guide
Figure 11a: 2- & 2.8-Liter Clamp Installation
Figure 11b: Clamp Fastener
9
NOTE:
The upper girdle secures the flask within the clamp, and the bottom girdle
keeps the flask from spinning.
6.3
Installing/Sliding out Platform
The I-26/I-26R is delivered with the subplatform bolted in place on the bearing housing.
The addition of a platform is required for shaker operation.
Installing a platform
of any variety is very easy:
1. Make sure the front latches of the platform are open. If they are flush to the front of
the platform, press the button to pop both latches out.
2. Using the side handles of the platform (
see Figure 12 on the following page
), place it
on the guide strips on the flat of the open door.
3. Using the center front handle on the platform, push it toward the rear of the unit,
aligning the bottom of the platform with the top of the subplatform, and making sure
the sides are squared up with the subplatform sides.
4. When it is fully inserted and mated to the subplatform, close both latches.
5. Verify that the platform is now secured to the subplatform and the drive.
UPPER GIRDLE WITH
GIRDLE TUBES
LOWER GIRDLE
WITH GIRDLE TUBES
PLATFORM
CLAMP
MOUNTING HOLES (5)
CLAMP BODY
(LEGS AND BASE)
