Brunswick Boston Whaler 22 Guardian Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 128

2-5
Boat Operation Section 2
To START the port outboard engine, the control port
lever must be in the NEUTRAL position. The ignition
shutoff switch clip and lanyard must be attached to the
shutoff switch. Turn the port main engine key switch
to the ON position and then to the START position.
DO NOT hold the key in the START position. The port
engine’s electronic control module (ECU) will start the
engine automatically. If the port engine does not start,
turn the key to the OFF position and repeat the starting
process.
To STOP the port engine, turn the port main engine
key switch to the ACC or OFF position. If you are
securing the port engine from service, turn the port
main engine key switch to the OFF position.
To start or stop the starboard engine, follow the proce-
dures above using the control starboard lever and the
starboard main engine key switch.
For additional engine control information, refer to the
engine operator’s manual in your owner’s bag.
!
CAUTION
Leaving the main engine key switches in the
ACC or ON position when the engines are not
running will drain the starting batteries and
might damage the engines’ electrical systems.