Bruno Curb-Sider VSL-6000, Руководство оператора

Страница: 4 / 24

4
©BRUNO
VSL-6000/6900UK Operator’s 04/16/201
1.0 FOR YOUR SAFETY
• The Curb-Sider® is designed to lift mobility
devices weighing up to 400 lb (181 kg)
• Do not abuse or exceed the maximum lift
capacity indicated on the unit.
• Do not remove any guards or covers.
• Always be aware of surface conditions before
using the lift and take appropriate care.
• Park the vehicle on a horizontal, level surface.
Load and unload on as level a surface as
possible.
• Avoid unloading into vehicular traffic.
• Read and understand the operating
instructions, and all safety precautions prior
to using the lift. Operate the lift several times
while the installer is available to answer
questions.
• Vehicle engine must be shut off, with
transmission set in park (parking brake
must be engaged on models with manual
transmission).
• Keep hands, fingers and feet away from moving
components during lift operation.
• Be sure the power source of the device being
lifted (scooter, power chair, wheelchair) is OFF
before attaching it to the lift.
WARNING: Read vehicle manufacturers (OEM)
instructions about the vehicle’s
electrical system BEFORE working
on the vehicle. Vehicle OEMs
have model specific requirements
about battery disconnection when
performing work on a vehicle.
Disconnecting batteries incorrectly
or working on a vehicle with batteries
improperly in the circuit MAY cause
loss of vehicle data, damage vehicle
wiring system or even cause airbags
to deploy. This information can be
found in the VEHICLE OWNER’S
MANUAL or the VEHICLE REPAIR
GUIDE.