background image

67

©2004,1998 Bruno Independent Living Aids, Inc.®

CRE-2100 NRUL  08-16-2004

FIVE YEAR MAJOR COMPONENTS WARRANTY

TWO YEAR LIMITED WARRANTY

for

Bruno Stairlifts

Bruno Independent Living Aids, Inc. (“Bruno”), warrants to the original purchaser of a Bruno

Stairlift that the Bruno Stairlift is free from defects in material and workmanship for a period of

two years from date of purchase.  In addition, Bruno warrants that the motor, gear box and rail

(the “Major Components”) will be free from defects in materials and workmanship for a period of

five years from the date of purchase.

The exclusive remedy for a defect in a Bruno Stairlift shall be the repair or replacement, at the

option of Bruno, of the defective part or component. After the first 30 days of this warranty, only

parts and components are covered. This warranty does not cover labor and other services after

the initial 30 days. If repair or replacement of a Bruno Stairlift is not commercially practical or

cannot be timely made, Bruno may elect to refund the purchase price of the Bruno Stairlift

instead of repairing or replacing the Bruno Stairlift.

IN NO EVENT SHALL BRUNO BE RESPONSIBLE FOR INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES, WHETHER SUCH DAMAGES ARISE FROM CLAIMS BASED

ON CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR

PRODUCT LIABILITY. 

Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not apply to you.

ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN THEIR DURATION TO THE

LENGTH OF THE WARRANTY STATED ABOVE FOR THE AFFECTED COMPONENT. 

Some

states do not allow limitations on how long an implied warranty lasts so the above limitation may

not apply to you.

To obtain warranty service, you must follow these procedures:

1.

Obtain return authorization by calling your local Bruno dealer or Bruno at

1-800-882-8768;

2.

Return the Bruno Stairlift, freight prepaid, to the address provided by your

Bruno dealer or Bruno with proof of purchase indicating the date purchased.

Bruno will pay for shipping back to the purchaser within the continental United States and

Canada if a defect in material or workmanship is discovered. Return freight and repair charges

will be the responsibility of the purchaser if the problem is not covered by warranty.

This warranty does not cover damage or failure caused by misuse, abuse, accidents,

physical damage, modifications not made by Bruno, damage in shipment, or repairs undertaken

by anyone other than Bruno factory employees or authorized distributors. The “original pur-

chaser” of a Bruno Stairlift that is leased or rented shall be the person or entity acting as the

lessee or rental provider.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state. Bruno specifically does not authorize any person to extend the time or

scope of this warranty.

For further information regarding this limited warranty, please contact Bruno by calling

1-800-882-8768 or writing to Bruno at the following address:

Bruno Independent Living Aids, Inc.

Attention: Service Department

1780 Executive Drive, Post Office Box 84

Oconomowoc, WI 53066 USA

Содержание CRE-2100





































































Отзывы:

Похожие инструкции для CRE-2100