Bruno CRE-2100, Руководство по установке

Страница: 27 / 68

27
©2004,1998 Bruno Independent Living Aids, Inc.®
CRE-2100 NRUL 08-16-2004
INSTALLATION
TESTING THE CALL/SEND TRANSMITTER
1. Using the rocker switch on the seat armrest,
run the unit up and down the rail.
NOTE: The unit should travel noticeably
faster going up than down.
2. Check for smooth operation and travel.
3. Now, using one of the remote call/send
transmitters, run the unit up and down the rail.
4. Repeat Step 3 with the other transmitter.
5. Check for smooth operation and travel.
Soft Start Feature
The controller includes a
soft start feature which
causes a short delay between
the time the rocker switch
on the armrest is depressed
and the initiation of carriage
movement.
This is normal!
TESTING THE UNIT COMPONENTS
1. When the installation is complete, test the
operation of the following components:
a. rocker switch
b. footrest safety switches
c. carriage limit switches
d. seat safety switch.
CUSTOMER EDUCATION
Before leaving the installation site, be sure that the
customer fully understands the correct and safe
operation of the Stairway Elevator.
Have the customer operate the unit while you are
there to answer any questions or concerns.
Remind the customer to always use the seat
positioning belt.
NOTE: This unit includes equipment covered by FCC regulations.
Any changes or modifications to the call/send transmitter
or receiver, unless expressly approved by Bruno Independent
Living Aids, Inc.® (the party responsible for ensuring its
equipment complies with FCC regulations), could void the
user’s authority to operate the equipment.