Brunata Optuna H
UK-QB101575/29.05.2012
Installation Guide
Pages 4/16
Brunata a/s · Vesterlundvej 14 · 2730 Herlev · tlf. +45 77 77 70 00 · fax +45 77 77 70 01 · [email protected] · www.brunata.dk
Make sure the meter is installed sufficiently far away from possible sources of electromagnetic interference (switches,
electric motors, fluorescent lamps, etc.).
For medium temperatures of
90 °C or more
or if T
water
< T
ambient
(application as cooling meter or heat/cooling meter),
the integrator
must be removed
from the meter and installed a sufficient distance away from heat sources.
A wall holder (supplied with meter) or a spacer holder (optional) is available for this purpose.
It is recommended that stop valves be fitted before and after the energy meter to simplify removing the meter.
The meter should be installed in a conveniently accessible position for service and operating personnel.
Initial operation is to be carried out and recorded after installation.
