background image

Operating instructions 

 

Operation of the basic stove 

The fireplace should only be operated by adults, supervise children! Only use 

suitable lighting and burning materials as described in these operating instructions. 

Check whether there is a good combustion air supply to ensure perfect operation of 

the fireplace. 

Initial commissioning 

All the documents, accessories, tools and other objects provided must be removed 

from the firebox. Inform yourself fully as regards fuels (refer to page 8). To avoid 

cracks and damage when using for the first time, all cladding elements and 

components must be dry. The first burnup should be at a reduced heat, i.e., not with 

the full amount of fuel as the stove must firstly get used to the development of heat. 

Any smells which occur (e.g., from the firebox door) dissipate after a short time. 

Heating up 

Use 2.0 kg of small pieces of wood (strips) to heat up the fire (max. length 30 cm), 

leave the door ajar, the air slider should be fully open, 

allow to burn for approx. 10 minutes. 

Adding fresh fuel 

After 30 minutes place two logs (approx. 1.8 - 1.9 kg) next to each other in the 

firebox (max. length 28 cm), the combustion time is approx. 45 min., lock the door, 

move the air slider to the "nominal load position". Once the 2 logs have burnt, two 

logs of the same size are to be added. 

Add new fuel like this a total of 4 times. 

Overview 

Heating up 1 x 2.0 kg 10 min. 

Glowing embers 1 x 2.5 kg 30 min. 

Adding fresh fuel 1 x 1.8 - 1.9 kg 45 min. 

1 x 1.8 - 1.9 kg 45 min. 

1 x 1.8 - 1.9 kg 45 min. 

1 x 1.8 - 1.9 kg 45 min. 

 

 

Содержание Round Firebox R 250/H



















Отзывы: