3
Operating instructions
General requirements
Please note that national and local provisions must be satisfied when installing the
CITY-GRUNDI.
Please consult your competent district master chimney sweep about this prior to
installation.
He will advise you on the suitable chimney as well as all other requirements which
are of relevance for the setup and commissioning of your basic stove. A sufficient
combustion air supply must be ensured in particular, especially with a very well
sealed building shell, flat ventilation systems etc. in order to guarantee smooth
operation. Your chimney sweep will be able to help here too. He will also check that
the fireplace has been connected properly.
The CITY-GRUNDI described here is tested according to EN 13240:2005, 15a B-VG
and may be attached to a chimney with multiple connections provided that the
chimney's technical conditions allow this.
If the basic stove is attached to a chimney with multiple connections, the springs in
the firebox door must not be removed.
This ensures that the door closes automatically after adding more fuel and thus the
supply pressure of the chimney is not affected.
Installation site / fire protection regulations
When setting up the CITY-GRUNDI, the valid fire protection regulations of the
German Fire Code Ordinance (FeuVo) must be observed. The specified minimum
distances to combustible objects and walls must be maintained and the flooring must
also be protected.
Table with distances (page 4)
