background image

BRULA NEO service instructions 

Dated 03/18 

Page 

47 of

 

52 

 

Within the scope of this warranty promise BRULA GmbH reserves the right to 

either remedy the fault or replace the appliance free of charge. The elimination 

of defects shall take precedence. The terms of this warranty shall not extend to 

any damage or compensation not covered by statutory provisions. 

Extension of the warranty period 

The warranty period shall automatically be extended where claims made in 

respect of these warranty provisions result in the repair or replacement of 

defective equipment. 

Spare parts 

If replacement parts are used, only the manufacturer's own replacement parts 

or replacement parts recommended and approved by the manufacturer shall be 

used. 

Liability 

Damages and claims for compensation which are not the result of delivery of a 

defective appliance from BRULA GmbH are excluded and are not part of this 

warranty promise. The above shall not include claims made in respect of 

statutory legal requirements. 

Final comments 

In addition to these warranty conditions and our commitment to them, our 

dealers and contractual partners are available to advise and assist you. We 

expressly recommend that our fireplaces and stoves are regularly inspected by 

a qualified technician. 

Subject to technical changes and errors. 

 

 

Содержание BRULA NEO





















































Отзывы: