Bruker SampleXpress Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 174

Bruker SampleXpress Скачать руководство пользователя страница 90

90

Z31900_00_01

Maintenance

Improperly Performed Maintenance

Securing to Prevent Restart

Moving Parts

WARNING

Danger of injury due to improperly performed maintenance!

Improperly performed maintenance may lead to serious injury and significant material
damage.

f

Provide for sufficient mounting clearance before starting to work.

f

Keep the assembly area tidy and clean! Loose components and tools lying around
or on top of each other may lead to accidents.

f

When reinstalling previously removed components, make sure that the compo-
nents are mounted properly, all fixing elements are reinstalled, and all screws are
tightened to torque.

f

Before putting the device back into operation:

- Make sure that all maintenance work has been performed and completed fol-

lowing the instructions and information provided in this manual.

- Make sure that no persons are still in the danger zone of the device.

- Make sure that all covers and safety devices have been installed and function

properly.

WARNING

Danger to life from an unauthorized restart!

In the event of an unauthorized restart of the power supply during maintenance, there
is a danger of serious injuries or death for persons in the danger zone.

f

Switch off all power supplies before starting work and make sure they cannot be
switched on again.

CAUTION

Accident hazard from movement of mechanical parts!

The fingers or hand may be pinched due to movement of mechanical parts.

f

Shut off the SampleXpress before accessing the device.

«
...
88
89
90
91
92
...
»

Содержание SampleXpress















































































































































































Отзывы:

Нет отзывов