manualshive.com logo in svg

Bruker SampleXpress, Руководство пользователя, Страница: 23 / 174

Поделиться
Скачать
Bruker SampleXpress Скачать руководство пользователя страница 23

23

Z31900_00_01

Safety

3.5.7

Dangers from Radiation

Strong Magnetic Fields

i

Note: The magnetic field of the SampleXpress does not cause any personal injuries or 
property damage. For further information see the manual of the magnet used.

Bright LED Light

WARNING

Danger to life from strong magnetic fields!

Strong magnetic fields may cause serious injuries or death and significant damage to 
property.

f

Persons fitted with heart pacemakers must be kept away from the appliance. The 
functionality of the heart pacemaker could be compromised.

f

Persons with metal implants must be kept away from the appliance. Implants may 
heat up or be subject to magnetic attraction.

f

Ferromagnetic materials and electromagnets must be kept away from the mag-
netic source. Such materials could be subject to magnetic attraction and may fly 
around the room, injuring or killing people. Minimum distance 3 meters.

f

Remove magnetic items (jewelry, watches, pens etc.) before carrying out mainte-
nance work.

f

Keep electronic equipment away from the magnetic source. Such equipment 
could be damaged.

f

Keep storage media, credit cards etc. away from the magnetic source. Data could 
be erased.

CAUTION

Accident hazard from bright LED light!

Peering into the lighting system of optical sensors, e.g. barcode reader, may result in 
temporary blinding of the eyes due to the bright light.

f

Do not look into the ray of light.

f

Switch off the equipment before maintenance work.

Содержание SampleXpress















































































































































































Отзывы:

Нет отзывов