Bruker SampleXpress Скачать руководство пользователя страница 65

Страница: 65 / 174

Z31900_00_01

Operation

9.2.1

Main Menu Touch Screen Buttons in Single Access Mode

Figure 9.3

Main Menu Touch Screen Buttons

Enabled/Disabled Touch Screen Buttons

The Back Button

Screen

Submenu

Function

Main

„Info“

Displays all positions occupied with samples.

„Add“

For adding samples to the cassette.

„Remove“

For removing samples or the cassette.

„Settings“

For device configuration. See also chapter

"The

Settings Window" on page 82

When the button text is black, with a blue frame, it means the function is

enabled

and available for use.

When the button text is gray, with italic letters and a gray frame, it
means the function is

disabled

and not available for use.

Use the

Back

button in the upper right corner of the screen to return to

the previous menu. This button can be used in all submenus.

In some menus the program automatically returns to the previous menu,
when no action was performed within a given time.

Содержание SampleXpress















































































































































































Результаты поиска

Содержание SampleXpress

Отзывы:

Bruker SampleXpress, Руководство пользователя, Страница: 65 / 174

Результаты поиска

Содержание SampleXpress

Отзывы: