Assembly of Optical Viewing System
6
NanoScope Optical Viewing System
Rev. C
311.2.6
Attach Camera and Fiber Optic Cable
Attach the camera cable to the top of the camera using the elbow connector provided. The
connector is keyed so that it plugs onto the camera’s connector in the proper orientation.
Push the connector down until the outside ring snaps into place, locking the cable
connector to the camera. Route the cable through the retaining clip on the left side of the
focus mount assembly. Plug the camera power supply into the power strip. The power
supply is autoranging to line voltages 100-240 VAC and 50 or 60 Hz.
Figure 213.2b
Mounted Optical Assembly.
Note:
Orient camera body as shown (inset)
