BRP Johnson BJ25E4SUC, Руководство по обслуживанию

Страница: 78 / 265

76
ELECTRICAL
ELECTRIC STARTER SYSTEM
Troubleshooting
Before troubleshooting the electric starter system, make sure:
•
Battery is fully charged
•
All cables and wires are securely connected
•
Shift is in NEUTRAL position.
t.
•
Check battery for charg
ing condition.
•
Check battery terminals
for connections and cor
rosion.
•
Check pinion and over-
running clutch. Refer to
page 85.
•
Check starter magnetic
switch. Refer to
page 86.
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO (or turns slowly)
Does the flywheel rotate?
•
The magnetic switch
and / or connection is
faulty.
Replace it.
•
Check the brush and
brush holder. Refer to
page 84.
•
Check the armature
coil. Refer to page 82.
•
Check neutral switch.
Refer to page 77.
•
Check ignition switch.
Refer to page 77.
•
Check starter button.
Refer to page 77.
•
Check starter relay.
Refer to page 77.
•
Check wiring system
and connections be
tween starter relay and
ignition switch (or
starter button).
•
Remove starter motor
from engine.
•
Does starter motor turn
under no-load condi-
tions by connecting
battery (+) terminal to
“M” terminal of starter
motor and battery (–)
terminal to the starter
motor body?
•
Check for starter relay
“Click” sound when
turning ignition switch
to START (Remote
models).
•
Check for starter relay
“Click” sound when
starter button is depres-
sed (Tiller models).
•
Check battery for charg-
ing condition.
•
Check battery terminals
for connections and
corrosion.
•
Check 20A fuse and
fuse case. Refer to
page 72.
Does starter motor rotate?
Does engine turn over
with continued cranking?
Engine does not start.