BRP Can-Am OUTLANDER 400 EFI 2014, Руководство оператора

Страница: 129 / 164

VEHICLE CARE
Post-Operation Care
When vehicle is used in salt water envi-
ronment, rinsing the vehicle with fresh
water is necessary to preserve vehi-
cle and its components. Metallic parts
lubrication is highly recommended.
Use XPS LUBE (P/N 293 600 016) or an
equivalent. This must be performed at
the end of each operating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
NOTE: Never use a high pressure
washer to clean the vehicle. USE
LOW PRESSURE ONLY (like a gar-
den hose).
High pressure can cause
electrical or mechanical damage.
Vehicle Cleaning and
Protection
Never use a high pressure washer to
clean the vehicle.
USE LOW PRES-
SURE ONLY (like a garden hose).
High pressure can cause electrical or
mechanical damage.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
warm water and soap (only use mild
detergent). Apply non-abrasive wax.
NOTICE
Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.
______________
127