Open your Strike Force Wireless app on your mobile device. Simply choose the “ADD CAMERA” option
in the App. A QR code scanner will appear on your screen. Scan the QR code displayed on the camera
screen with your mobile device.
Follow the on screen options for setting the data plan for your new camera.
Quick Cellular Test
After you have installed batteries and an Empty SD card in your camera, set up an account at Strike
Force Wireless, and finished your subscription plan details, its time to do a test transmission.
Step1- Power on your camera, and take a test picture. Your SD card meter on the home screen will show
the number of pictures taken.
Step 2- Walk in front of your camera and trigger a test image.
Step 3- On your camera navigate to the
“LTE Test” option in the settings menu, and click on ENTER
button to start the test.
Your camera will make connection with a cell tower and transmit the images to your Strike Force Wireless
account. You can view the pictures on your laptop or mobile app. Your camera screen will display the
cellular signal strength. If your camera registers the cell tower strength low, you may need to relocate the
camera to an area with a stronger signal.
Upon a successful image transmission your images will appear in your image inbox within a couple of
minutes. Remember to refresh your app (by swiping down on the screen) or refresh your computer
screen to see the images.
When you set up your camera in the field, the camera will automatically connect to the Strike Force
Wireless servers and connect to your account. The camera will update its settings and communication
times with the ones set in the camera settings menu of your online account or mobile app.
Basic Camera Setup and Operation
Turning the Camera On
When the trail camera is powered ON, the display will light up and provide the following information.
Camera mode: TRAIL as a default. This setting will take photos. The countdown delay, battery meter and
number of pictures taken.
Entering the SETUP Menu
From the Home Screen press the Mode Button once to enter the cameras SETUP MENU.
Scrolling Through the Settings
In the Setup Menu, the camera
’s Up and Down Arrow Buttons are used to scroll through the cameras
available settings. If you use the Down Arrow Button you will scroll through the settings in the order they
are outlined in the cameras instruction manual below.
