Browan BW2250, Руководство пользователя

Страница: 63 / 75

BROWAN COMMUNICATIONS
Page 62
You can configure your SNMP agent to send SNMP Traps (and/or inform notifications) under the
defined host (SNMP manager) and community name (optional).
Figure 68 – SNMP Trap table settings
Click Add to add a new SNMP manager or Delete to delete a specific SNMP manager. Clicking Add :
Figure 69 – Add SNMP Trap
Host IP – enter SNMP manager IP address [dots and digits].
Host Port – enter the port number the trap messages should be send through [number].
Trap Type – select trap message type [v1/v2/inform].
Community – specify the community name at a SNMP trap message. This community will be used in
trap messages to authenticate the SNMP manager. If not defined, the default trap community name
will be used (specified in the SNMP table) [1-32 all ASCII printable characters, no spaces].
Save – save all current settings
Cancel – restore the last settings
System | Telnet
Use System | Telnet menu to manage the telnet/SSH service of your BW2250.
Figure 70 – System Configuration settings
Telnet Service – Enable or disable telnet service of BW2250
SSH Service – Enable or disable SSH service of BW2250.
The default of these two services are all Enabled . The current IETF SSH (SSHv2) is supported for
security of accessing BW2250 via telnet/CLISH.