Browan BW2250, Руководство пользователя

Страница: 51 / 75

BROWAN COMMUNICATIONS
Page 50
Figure 51 – Detail information of connected client
Client MAC – Show the connected client’s MAC address
IP Addr – Show the IP address of the connected client
Auth Type – Show the auth type that the connected client is used. Auth type includes PEAP, TLS or
TTLS.
Signal/Noise – Show the SNR value of the connected client
Input Packets – Show the packet number transmitted by the connected client
Output Packets – Show the packet number destined to the connected client
Clicking New or Edit on AP mode, the settings of MBSSID entry appears:
Figure 52 – Multiple BSSID Setting - 1
Radio – showing which RF card (wlan1 or wlan2) is being configured.
Mode – showing the current operation mode of BW2250 (AP or Bridge).
Interface – showing the current MBSSID | Bridge link entry
SSID – a unique ID for your wireless network. It is case sensitive and must not exceed 32 characters.
The default SSID is "BW2250" but you should change this to a personal wireless network name. The
SSID is important for clients when connecting to the access point. All client stations must have their
client SSID settings configured and must use the same SSID.
Each MBSSID entry (BSSID) can has its own SSID. And SSID can be same for
different BSSID