Browan BW2250, Руководство пользователя

Страница: 52 / 75

BROWAN COMMUNICATIONS
Page 51
Hidden SSID – When enabled, the SSID of this Interface is invisible in the networks list while
scanning the available networks for wireless client (SSID is not broadcasted with its Beacons). When
disabled, the AP’s SSID is visible in the available network list [enabled/disabled]. By default the
Hidden SSID is disabled.
VLAN and QoS – Specify VLAN policy or QoS policy. Data priority is based on (B) SSID and
implemented by 802.11e EDCA or 802.1p tag.
SSID priority (Disable VLAN) – specify the data priority, which is implemented according to
802.11e EDCA and makes sure the wireless downlink over-air QoS. This priority is based on (B)
SSID, which means different BSSID can have different data priority and the data of the same
BSSID has the same priority.
This data priority only makes sure the priority of downlink (from AP to wireless
client).
8 levels priorities are supplied. 1, 2, 0, 3, 4, 5, 6, 7 is from lowest priority to highest
priority.
And if no special QoS is needed, leave
priority to default (0). 0 means normal
priority.
Enable VLAN – When enabled, the outgoing packets from this SSID will be tagged with VLAN ID
and 802.1p tag (If have).
VLAN ID – Configure VLAN ID for each Multiple SSID devices. Valid numbers are from 1 to
4094.
802.1p Tag – Configure 802.1p Tag for remote APC’s or Router’s QoS uses. Valid numbers
are from 0 to 7.
VLAN ID and 802.1p tag must cooperate with remote Router or APC.
802.1p Tag is also used for data priority. 8 levels priorities are supplied. 1, 2, 0, 3,
4, 5, 6, 7 is from lowest priority to highest priority.
Accounting – Control the status of accounting service.
Enable Accounting – enable or disable the accounting service.
Accounting service only can be enabled when the security policy using RADIUS
server is chosen. The security policies using RADIUS server include 802.1x, WPA,
WPA2, WPA2 MIXED and MAC auth.
Accounting Server Profile – specify which RADIUS server is used for accounting service. If
not have any RADIUS server: please configure Network | RADIUS Servers Web UI first.
Accounting Interim Interval – specify the value (in minutes), which is used for interim-
accounting interval. This should not be left empty and the value range is from 1 to 60
minutes.