Embroidery
6
d
Select the pattern that you want to
embroider, and then press
.
e
Select how to divide the pattern. For this
example, select “Semi-Auto split quilt
sash”.
a
Auto split quilt sash
Quilting border patterns up to 760 mm x 500 mm
(approx. 29-7/8 inches x 19-5/8 inches) can be
split into four sections to be stitched in the 408
mm x 272 mm (16 inches x 10-5/8 inches)
embroidery frame. The built-in camera will assist
with placement.
For details on the procedure, refer to
“Embroidering Quilting Border Patterns” in the
machine's Operation Manual (Embroidery).
In the screen that appears after pressing this key,
select the embroidery frame to be used.
After entering all values, press
.
Press
to select single stitching or triple
stitching.
b
Semi-Auto split quilt sash
By rehooping the fabric to embroider connecting
patterns, a quilting border of up to 3 m × 3 m
(approx. 118 inches × 118 inches) can be created.
The pattern is positioned manually.
f
Specify the size of embroidery frame to be
used and the size of the quilting border, and
then press
.
a
Press
or
to select the embroidery frame
size.
b
Specify the width (
1
), height (
2
) and quilting
border width (
3
),and then press
.
Note
• Patterns 011-015 of the single-color
rectangular border patterns will be grayed
out if KIT I has not been certified.
Note
• The size of item that can be created differs
depending on the type of split that was
selected. Check the layout of “Auto split
quilt sash”, and then select “Semi-Auto split
quilt sash” if the layout did not appear as
desired.
a
b
Note
• Mark the upper-right corner of the quilt
border with a chalk pencil. On the
machine’s screen, enter the horizontal and
vertical measurements to match the
orientation of the quilt with the marked
corner positioned in the upper right.
a
b
