Brother ULT-2001 Скачать руководство пользователя страница 177

Страница: 177 / 319

5-2

Embroidery

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

■

About Floppy Disks

• If your machine did not come furnished with a built-in floppy disk drive, you can receive an

upgrade service for your machine, so that it can use floppy disks at your authorized dealer.

• If floppy disks containing data other than that created for this machine, or patterns saved

from your machine, are inserted into your machine, the machine may not operate correctly.

• Only insert or remove floppy disks when

is displayed, or when prompted to

change disks by the screen (see page 5-18).

• Data saved on floppy disks may be lost or sometimes corrupted. Always make a backup of

any important data saved on floppy disks.

• If the head of the floppy disk becomes dirty, the data can not be read normally. Use a

cleaning disk for floppy disks regularly to avoid problems (see page 8-4). Be sure to follow
the drive cleaning instructions on the package.

• Do not leave floppy disks where bits of thread or lint are likely to collect. These things may

damage the disks. Put the disks in the hard case when storing.

• Do not leave floppy disks near the TV, magnets, or other objects with magnetic properties.

Otherwise, the data on the disk may become unreadable.

• Floppy disks are 2HD type. Be sure to use formatted disks.
• Move the write protect switch on the floppy disk to the unprotected position before using

the disk.

• Only use letters and numbers for the file names of the embroidery data. Using special

symbols may prevent the data from being saved.

Содержание ULT-2001
































































































































































































































































































































Результаты поиска

Содержание ULT-2001

Отзывы:

Похожие инструкции для ULT-2001

Бренды по названию

Популярные бренды

Brother ULT-2001, Руководство по эксплуатации

Результаты поиска

Содержание ULT-2001

Отзывы:

Похожие инструкции для ULT-2001

Бренды по названию

Популярные бренды