Chapter 1
4
Regularly remove the power plug from the power outlet, and clean the base of the prongs and
between the prongs. If the power plug is left in the power outlet for an extended period of time,
dust will accumulate at the base of the power plug prongs. This could cause a short circuit that
may result in fire.
Do not allow organic solvents, such as benzene, thinner, polish remover or deodorizers, to come
into contact with the cables. These may cause the cables to warp or dissolve, resulting in electric
shock or fire.
Do not use damaged power plugs or a bent power outlet, otherwise fire, electric shock or
damage may result.
Do not overload power outlets or plug multiple devices into the same power outlet, otherwise
fire, electric shock or damage may result.
When unplugging the power cord from the power outlet, do not pull on the cord. Hold the power
plug and pull it out of the power outlet, otherwise fire, electric shock or damage may result.
Use the cables correctly and observe the following precautions, otherwise fire or electric shock
may result.
Do not damage them.
Do not modify them.
Do not twist them.
Do not severely bend them.
Do not pull on them.
Do not place objects on them.
Do not subject them to heat.
Do not bind them.
Do not allow them to be pinched.
Fully insert the power plug into the power outlet and power cord connector into the power cord
jack, otherwise fire, electric shock or damage may result.
Brother strongly recommends that you DO NOT use any extension cord.
However, if an extension cord is required, use it correctly and in compliance with the general
guidelines for its use. If an extension cord is incorrectly used, fire, electric shock or damage may
result.
When connecting cables and installing either tape or fabric ribbon cassettes and ink ribbon
cassettes, be sure to connect and install them correctly and in the correct order.
Only connect items that are designed specifically for this machine, otherwise fire or injury may
result. Refer to the User's Guide when making connections.
WARNING
Содержание TP-M5000N
Страница 67: ...Printed in China LNA699001 ...