Brother RuggetJet RJ4030, Руководство пользователя

Страница: 35 / 62

31
3
3
Overview
3
The RJ Utility is a computer program that
allows you to change the printer's default
settings.
Normally when using a computer program to
print a document, print settings are specified
in the printer driver's dialog box and then the
data is sent to the printer. This utility can be
used to adjust settings that are more
advanced than the printer driver’s settings.
Using the RJ Utility
3
Before Using the RJ Utility
3
 Connect the printer to an AC or DC power
outlet, or make sure that the battery is
fully-charged.
 Make sure that the printer driver has been
installed and is functional.
 Connect the printer to a computer via USB
or Bluetooth (RJ-4030 only).
Starting the RJ Utility
3
a
Connect the printer to be configured to
the computer.
b
Click [ Start ] - [ All Programs ] -
[ Brother ] - [ Label & Mobile Printer ] -
[ Printer Setting Tool ]. The [ Printer
Setting Tool ] screen is displayed.
c
Select the printer connected in step
a
.
d
Click the [ Utility ] button.
The main window is displayed.
(See
Main Window
uu
page 32.)
How to Use the RJ Utility
3
a
In the main window of the RJ Utility,
select the check boxes of the
parameters with settings that can be
changed.
b
Select the desired settings from the
pull-down menus or enter the desired
values.
c
Click [ Apply ] to save the settings in the
printer.
Note
The settings are saved when you quit the
RJ Utility, and the settings are applied the
next time the RJ Utility is started.
Note, however, that if the printer is already
connected when the RJ Utility is started,
the printer's settings are applied.
RJ Utility
3
Use the RJ Utility to configure the
printer only when the printer is idle. The
printer may malfunction if you attempt to
configure it while it is handling a job.