![background image](http://html.mh-extra.com/html/brother/rh-9820/rh-9820_service-manual_21901080.webp)
6. ASSEMBLY
RH-9820
71
E
Belt tension adjustment
Repeat steps1 to 3 to adjust the belt tension until it
is within the ranges given below.
・
When using a new belt: 80 - 90 N
・
When reusing an old belt: 60 - 70 N
1)
Loosen the two screws (b) of the Y pulley
support assembly (a).
2) Use the adjustment screw (c) to adjust the belt
tension.
3) Tighten the two screws (b) of the Y pulley
support assembly (a).
* Be sure to use a belt tension gauge to measure
the belt tension, and measure at the position
shown in the illustration.
* The belt tension gauge should be set to
measure a unit weight of 0.04 kg/m, a belt width
of 10 mm and a span length of 120 mm.
0844B
0845B
Measurement position
Содержание RH-9820
