![background image](http://html.mh-extra.com/html/brother/rh-9820/rh-9820_service-manual_21901015.webp)
2. FUNCTION SETTINGS
6
RH-9820
Work clamp settings
No.
Setting
range
Setting items
Default
value
Sewing machine starting procedure
* This is not overwritten by CF card data.
Hand start switch or 2-pedal foot switch
050
Treadle
*
Delay time for 1-pedal operation when cutting before sewing is set (ms)
* This is displayed when 1-pedal operation is being used.
051
0 - 800
When carrying out automatic sewing with cutting before sewing, the hammer operates
only after the set delay time has passed.
Setting can be carried out in units of 50 ms.
0
Work clamp operating position for treadle
* This is displayed when treadle operation is being used.
052
105 - 125
When a smaller value is set, the amount that the treadle is depressed to reach the work
clamp operating position becomes smaller.
115
Sewing machine starting position for treadle
* This is displayed when treadle operation is being used.
053
135 - 175
When a smaller value is set, the amount that the treadle is depressed to reach the
sewing machine starting position becomes smaller.
155
Work clamp raising operation position for treadle
* This is displayed when treadle operation is being used.
054
65 - 85
When a larger value is set, the amount that the treadle is depressed backward to reach
the work clamp raising operating position becomes smaller.
75
Work clamp operation standby for treadle
* This is displayed when treadle operation is being used.
OFF
After the work clamp has been lowered, the work clamp is raised when the treadle is
moved to the neutral position.
055
ON
After the work clamp has been lowered, the work clamp is held in the lowered position
even when the treadle is moved to the neutral position, and the work clamp is raised
when the treadle is depressed backward.
OFF
Work clamp down operation when feed base is forward
OFF
When the feed base moves to the forward setting position after sewing is finished, the
work clamp moves while it is still raised.
056
ON
When the feed base moves to the forward setting position after sewing is finished, the
work clamp moves while being lowered at the same time, and once the work clamp
finishes moving, it is raised.
OFF
Work clamp raising allowed during test feeding
OFF
Raising of the work clamp is not allowed during test feeding.
057
ON
The work clamp can be raised during test feeding when the following operations are
carried out.
(A) For hand start switch or 2-pedal foot switch operation: Press the work clamp switch.
(B) For treadle operation: Depress the treadle backward.
When test feeding is carried out again, the following operations must be carried out to
lower the work clamp.
(A) For hand start switch or 2-pedal foot switch operation: Press the work clamp switch.
(B) For treadle operation: Depress the treadle.
OFF
Work clamp operation after automatic sewing is finished
OFF
After automatic sewing is finished, work clamp is raised.
058
ON
After automatic sewing is finished, work clamp remains lowered.
To raise the work clamp, carry out the following operations.
(A) For hand start switch or 2-pedal foot switch operation: Press the work clamp switch.
(B) For treadle operation: Depress the treadle backward.
* When using the fly indexer, this function is disabled.
OFF
Содержание RH-9820
