manualshive.com logo in svg

Brother ReChargX RX417XX, Инструкция по эксплуатации, Страница: 8 / 14

Поделиться
Скачать
Brother ReChargX RX417XX Скачать руководство пользователя страница 8

TonerRefillKits.com

   ReChargX

™

 RX417XX

9am - 5pm ET  Mon - Fri 

© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the 

 

V1.0 - 2016.09.28

800.527.3712 or 352.343.7533 

ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved. 

Page 8 of 14

Wedge the tip of a flat-blade screwdriver between the 

lip of the toner hopper opening and the toner hopper 

plug. Then pry the plug up and out (Figure 8-8).

Note

: TN starter plug will look different but the 

removal process is the same.

Step 9: Remove the remaining Brother toner

Prior to adding “fresh” toner, we must remove the 

residual “old” toner.

On the first refill of your Brother toner cartridge, the 

new toner should not be combined with whatever 

quantity of Brother toner remains in the hopper.  

Failure to remove the remaining Brother toner will 

result in splotching, smudging, hazing and other   

print defects.

Note: This step does not need to be performed on 

subsequent refills when fresh ReChargX™ toner 

is being added to existing ReChargX™ toner.

Insert the toner hopper opening end of the cartridge 

into the plastic zip-top bag which is included in the 

ReChargX

™ 

RX417XX toner refill kit (Figure 9-1).

Carefully pour out as much of the residual toner as 

possible (tapping along the side of the cartridge helps 

to keep the toner flowing) (Figure 9-2).

If the toner stops flowing, stand the cartridge upright 

(with the toner hopper fill hole facing up) and then put 

the end of the cartridge back into the bag and 

continue the emptying process.

With the majority of the toner removed, remove the 

cartridge from the bag. Seal the bag and discard it.

D

Figure 8-8: 

Removing the toner hopper plug

Figure 9-1: 

Inserting cartridge into zip-top bag

Figure 9-2: 

Dumping out the remaining Brother toner

Содержание ReChargX RX417XX















Отзывы:

Нет отзывов